Viewing Platform Deck Replacement – Black Bridge, Chippenham

We were recently appointed by Wiltshire Council to replace the viewing platform deck at Black Bridge in Chippenham, a structure where we originally installed the decking back in 2001.

After 25 years, the Mark II MIF Acme Composite Panels had naturally reached the end of their lifespan. One panel had sustained damage, requiring the platform to be closed. MIFL were able to survey the structure, manufacture the new panels, and complete the full installation in less than one month!

The challenges involved:

Full fall arrest harness, rescue winch and rescue plan set up prior to removing and replacing the open span structural deck

Specialist access equipment required to negotiate the steep flight of stairs

Structural steelwork and galvanising inspected whilst clipped onto the structural beams, with Bituthene 4000 membrane applied to the horizontal bearing plate before installation

The binocular spindle hole left in the middle of the deck also required attention

Our AutoCAD design team adapted the original 2001 layout to meet the same structural load requirements, this time specifying MIF Mark IV Composite Panels which are 30% lighter than the Mark II panels they replaced.

Products used:

28mm thick, Ref 216 black MIF Composite Panels (viewing platform)

16mm thick MIF Composite Panels with white site line (stairs)

The result: a two-man team replaced the entire 24m² structural deck in just two days which minimised closure time, getting the platform back open to the public as quickly as possible.

Survey to completed installation in under one month.


Looking for a partner you can rely on? Call 01252 781314 or email info@mifl.co.uk to start the conversation.

Another one of our recent projects, completed for Amco Giffen at Rudyard Valve Tower, Leek, Staffordshire.

The brief was to replace damaged and missing stair treads within an enclosed area near open water, ensuring a safe and durable solution.

Working across 64 steps (670mm x 300mm), the existing treads were carefully removed in sequence and used as a template to ensure accurate replacement.

New GRP treads including nosings in safety yellow were then marked, cut and installed. Each tread was drill fixed using 6mm x 60mm round head stainless steel screws, alongside Unibond PL300 adhesive and sealant for a secure finish.

The result is a robust, slip resistant solution that improves both safety and longevity in a challenging environment.

Completed over a 3 day installation period, the project was delivered efficiently with minimal disruption.

Client feedback was very positive, with the completed works meeting all of their expectations.

Looking for a partner you can rely on? Call 01252 781314 or email info@mifl.co.uk to start the conversation.

Midland Industrial Flooring recently completed a 300sqm stores floor refurbishment at Rugby Rail Depot for Colas Rail, replacing a resin system originally installed in 1998.

The epoxy self-smoother laid by Midland Industrial Flooring in 1998 was starting to break up under the constant movement of fork trucks and pump trucks. The small wheeled trolly wheels were getting stuck in cracks and holes in the old resin floor screed.

Because the stores were in constant use 24/7, the store refurbishment works had to be phased within a two-week window. The old self-smoothing epoxy screed had debonded in many areas, so the entire system needed removing back to the in-situe concrete.

Proposed Solution
1. The entire floor was plantary grinded with a vacuum-captive, dust free, Floor planner to mechanically remove any existing defective self-smoothing system and also provide a tamped finish to the concrete floor.

2. MIF Grip ST, oil and surface tolerant primer pigmented was applied at 250g/sqm

3. Trowel applied Pumaflow light grey, 3 part heavy duty epoxy self-smoothing screed over the entire floor area to leave a uniform smoothed surface appearance ideal for trolleys and pump truck movements.

Products Used
MIF Grip ST Pigmented Primer.
Pumaflow medium duty epoxy floor topping with a smooth gloss finish.

Outcome
The entire installation was completed in two weeks and handed back to the client.

Client Feedback
The client immediate noticed how easily the small wheeled trollies glided over the smooth floor.

Looking for a partner you can rely on? Call 01252 781314 or email info@mifl.co.uk to start the conversation.

Midland Industrial Flooring recently completed a 300sqm stores floor refurbishment at Rugby Rail Depot for Colas Rail, replacing a resin system originally installed in 1998.

The epoxy self-smoother laid by Midland Industrial Flooring in 1998 was starting to break up under the constant movement of fork trucks and pump trucks. The small wheeled trolly wheels were getting stuck in cracks and holes in the old resin floor screed.

Because the stores were in constant use 24/7, the store refurbishment works had to be phased within a two-week window. The old self-smoothing epoxy screed had debonded in many areas, so the entire system needed removing back to the in-situe concrete.

Proposed Solution
1. The entire floor was plantary grinded with a vacuum-captive, dust free, Floor planner to mechanically remove any existing defective self-smoothing system and also provide a tamped finish to the concrete floor.

2. MIF Grip ST, oil and surface tolerant primer pigmented was applied at 250g/sqm

3. Trowel applied Pumaflow light grey, 3 part heavy duty epoxy self-smoothing screed over the entire floor area to leave a uniform smoothed surface appearance ideal for trolleys and pump truck movements.

Products Used
MIF Grip ST Pigmented Primer.
Pumaflow medium duty epoxy floor topping with a smooth gloss finish.

Outcome
The entire installation was completed in two weeks and handed back to the client.

Client Feedback
The client immediate noticed how easily the small wheeled trollies glided over the smooth floor.

Looking for a partner you can rely on? Call 01252 781314 or email info@mifl.co.uk to start the conversation.

Recently, our team completed a cross hatching installation at Rugby Rail Depot for Colas Rail, helping to deter unsafe pedestrian behaviour under active roller shutter doors while working around tight operational constraints.

This project required careful planning, specialist materials, and precise execution to deliver a durable, high visibility solution in challenging conditions.

The solution we proposed..
1) To mechanically abrade the surface of the existing concrete with vacuum-captive, dust free shot
blasting to remove surface contaminants and laitance and provide acceptable key for overlayment.
2) The four doorways leading out from the stores and the welding shop, that have defective steel runners, will have additional preparation by removing steel tracks and the defective and broken concrete either side of the steel tracks, priming with MIF Grip FC Damp Primer and screeding with MIF Grip FC Floor Screed flush with surround.
3) To then mask up the rectangle and apply one coat of MIF Grip FC Damp Primer to the prepared concrete at a rate of 2.5m2/kg and whilst still wet to blind with 1-1.6mm Bassalt.
4) Mask up each of the doorways according to the matrix, and to roller apply one coat of MIF Grip FC Colourcoat in RAL1023 over the entire rectangle at a rate of 2.5m2/kg leaving a uniform-coloured surface.
5) Masking to then set up the 300mm yellow, plus 300mm black chevron pattern and apply one coat of MIF Grip FC Colourcoat in black into the black chevrons.

We managed to complete this in just two days working around heavy rain and howling gales.

Looking for an industrial flooring partner you can rely on?

Call 01252 781314 or email info@mifl.co.uk to start the conversation.

Who doesn’t love a before and after photo?!

Over 21 years after MIFL originally installed the flooring system to Rugby Road Depot (Pit 1), we returned to the site to carry out refurbishment works.

The project focused on maintaining safety, durability, and compliance within a live rail environment, where downtime had to be kept to an absolute minimum.

Our team carried out vacuum blasting, dust free surface preparation (to ensure a clean and stable substrate), followed by installation of a new high performance resin flooring system designed for heavy duty industrial use.

Key elements of the works included:

• Careful preparation of existing substrates to remove wear and contamination
• Application of compatible primers to ensure long term adhesion
• Use of high-strength resin repair materials designed to withstand heavy traffic and mechanical stress
• Finishing with durable coatings to restore performance and extend service life

All works were completed safely and efficiently, with minimal disruption to depot operations.

What makes this project particularly notable is the longevity of the original installation. More than two decades on, the flooring system continues to perform, a clear demonstration of the value of doing things properly from day one!

Projects like this reinforce MIFL’s commitment to safety, quality, and long term partnerships with our clients.

Looking for an industrial flooring partner you can rely on for the long term?

Call 01252 781314 or email info@mifl.co.uk to start the conversation.

A full welding shop refurbishment completed in just 3 days, within a live 24/7 rail environment.

As part of ongoing improvement works at Colas Rail’s Rugby Rail Depot, Midland Industrial Flooring was appointed to refurbish the Welding Shop and adjoining Welding Corridor.

The project was driven by an internal audit requirement, with all walkways specified to be green with clearly defined yellow edges. In addition, the welding shop floor had suffered extensive impact damage, creating slip and trip hazards that needed to be addressed quickly and effectively.

All works were carried out within a live industrial environment operating 24/7, with welding activities continuing in close proximity throughout. As a result, all materials selected were solvent-free and low VOC, without compromising performance or durability.

Preparation works included:
• Mechanical abrasion and removal of defective coatings using a vacuum captive, dust-free shotblasting process
• Formation of a 10mm wide by 1mm deep saw cut along door thresholds to act as a resin anchor
• Filling all holes and local defects flush using MIF Grip ST Filler

Once preparation was complete, MIF Grip ST Pigmented Primer was applied at 2.5m²/kg, fully blinded with 0.4–0.8 DKI Quartz to achieve a uniform, slip-resistant surface at approximately 1mm thickness.

Finishing works included:
• Pumatect Fast Cure to the welding shop floor
• Pumatect Fast Cure to the welding corridor to clearly define walkways
• Pumatect V Fast Cure Safety Yellow applied to all specified edges for full safety compliance

Despite the operational constraints, the entire workshop and adjoining walkway (313sqm in total) were fully refurbished in just three days, with minimal disruption to depot activities.

Projects like this highlight the importance of careful material selection, detailed preparation, and efficient programme management when working in live industrial environments.

Looking for an industrial flooring partner you can rely on for safe, compliant, and long-lasting solutions?

Call 01252 781314 or email info@mifl.co.uk to start the conversation.

Not every challenge is technical, environmental considerations played their part in this one!

Midland Industrial Flooring was appointed by Gloucestershire Highways to carry out the refurbishment of Parkend Swing Bridge, located on the Gloucester & Sharpness Canal at Castle Lane, Gloucester.

The project involved the replacement of the existing MIF Composite Panels originally installed in 2010. While the works themselves were straightforward, the programme experienced unavoidable delays due to birds nesting on the structure.

Once works were able to commence, the priority was to complete the refurbishment as quickly as possible. The bridge provides access to local residents and businesses, and any extended closure would have required a long six mile diversion, making a fast redeck essential.

MIF Composite Panels were manufactured to measure as structural load bearing panels under ISO factory controlled conditions. The new panel layout was designed to match the existing deck configuration exactly, allowing the original panels to be swapped out efficiently with minimal disruption.

Using MIF 24mm Ref 4NT 3–5mm Composite Panels, the installation team completed the full deck replacement safely and efficiently. Despite the earlier delays, the entire installation phase was completed in just five days.

Local residents expressed their appreciation for our quick work and the minimal disruption.

This project marks the fourth bridge refurbishment of this type successfully delivered by Midland Industrial Flooring Ltd on the Gloucester & Sharpness Canal, reinforcing our experience in delivering durable, low disruption solutions for local authority infrastructure.

Looking for an industrial flooring and structural decking partner you can rely on in even the most challenging environments?

Wildlife included.


Looking for a partner you can rely on? Call 01252 781314 or email info@mifl.co.uk to start the conversation.

At Midland Industrial Flooring Ltd, we specialise in designing and manufacturing long lasting, safety led composite panel systems that perform in demanding public environments.

Our recent project for Swansea Council at Olchfa School Footbridge in Sketty, Swansea, demonstrates our ability to deliver bespoke refurbishment solutions that enhance safety and durability while minimising disruption.

Originally installed in 2003, the MK3 Acme Composite Panels on the 44-metre-long footbridge had worn along the centre of the deck span. Water pooling had become a recurring issue, particularly in winter when freezing created a safety hazard.

MIFL manufactured and installed new MK4 Composite Panels with a built-in fall and enhanced waterproofing system.

The solution included:

  • Manufacturing MK4 MIF Composite Panels with a built-in fall in one section to eliminate pooling.
  • Incorporating a machined joint detail and polyurethane joint sealant for a fully waterproof system.
  • Using flexible resins in the manufacturing process to accommodate microcrack stresses caused by repeated footfall.
  • Specifying a Reference 216 slip-resistant pedestrian profile with additional wear resistance.
  • Installing a MIF Alispar tread, screwed and glued to the original landing tread to maintain level transitions and prevent trip hazards.
  • The installation was completed within five days during the October half term holiday. The refurbished footbridge is now fully waterproof, puddle-free, and performing to client expectations.
  • Swansea Council commended the quality of workmanship.

This project showcases MIFL’s unique capability as a UK based manufacturer and installer to design and deliver bespoke solutions for challenging site conditions.

Looking for a reliable partner for your next infrastructure or public works project?

📞 Call 01252 781314 or email info@mifl.co.uk to start the conversation.

At Midland Industrial Flooring Ltd, we specialise in designing and manufacturing long lasting, safety led composite panel systems that perform in demanding public environments.

Our recent project for Swansea Council at Olchfa School Footbridge in Sketty, Swansea, demonstrates our ability to deliver bespoke refurbishment solutions that enhance safety and durability while minimising disruption.

Originally installed in 2003, the MK3 Acme Composite Panels on the 44-metre-long footbridge had worn along the centre of the deck span. Water pooling had become a recurring issue, particularly in winter when freezing created a safety hazard.

MIFL manufactured and installed new MK4 Composite Panels with a built-in fall and enhanced waterproofing system.

The solution included:

  • Manufacturing MK4 MIF Composite Panels with a built-in fall in one section to eliminate pooling.
  • Incorporating a machined joint detail and polyurethane joint sealant for a fully waterproof system.
  • Using flexible resins in the manufacturing process to accommodate microcrack stresses caused by repeated footfall.
  • Specifying a Reference 216 slip-resistant pedestrian profile with additional wear resistance.
  • Installing a MIF Alispar tread, screwed and glued to the original landing tread to maintain level transitions and prevent trip hazards.
  • The installation was completed within five days during the October half term holiday. The refurbished footbridge is now fully waterproof, puddle-free, and performing to client expectations.
  • Swansea Council commended the quality of workmanship.

This project showcases MIFL’s unique capability as a UK based manufacturer and installer to design and deliver bespoke solutions for challenging site conditions.

Looking for a reliable partner for your next infrastructure or public works project?

📞 Call 01252 781314 or email info@mifl.co.uk to start the conversation.